How the Bunn Velocity Brew BX Brews Coffee in Three Minutes
Introduction
The Bunn Velocity Brew BX brewer is a coffee pot that brews up to 10 cups of great tasting coffee or tea in three minutes through the use of an internal hot water tank. The intended audience for this paper is those who brew coffee, tea or both on a daily basis and have never used the Bunn Velocity Brew BX brewer, but are interested in learning more about how it brews coffee so quickly.
The internal hot water tank keeps the water about 200 degrees F at all times, so coffee or tea is ready in three minutes without tasting bitter (Bunn, n.d.).
The steps to brewing hot coffee or tea in three minutes listed below are (1) filling the internal hot water tank and turning it on, (2) using the funnel, and (3) making coffee or tea.
The Process
Filling the internal hot water tank. After unboxing the BX brewer and removing all packaging, rinse the coffee pot with soap and water, then fill the pot with fresh water and pour into the tank by opening the lid on top of the brewer. It will take a couple of pots of water to fill the tank. Once filled, plug the brewer into the power outlet and turn on the hot water tank by the switch on the bottom left side of the brewer. As the stainless steel hot water tanks get hot, you will hear the sound of water being heated. Once the water reaches 200 degrees F, the sound will stop and the hot water heater will maintain the temperature of the water.
Using the funnel. Place a coffee filter inside the funnel and fill it with the desired amount of coffee. If making tea, just place the desired number of tea bags inside the funnel. Then, slide the funnel into the track located just below the brewer’s on/off switch on the top front stainless steel panel.
Making the coffee or tea. Fill the coffee pot with water to the desired number of cups. Pour the water into the top of the brewer as when filling the hot water tank. Close the lid and immediately place the coffee pot onto the pot warmer underneath the funnel. The brewer immediately begins to draw hot water from the hot water tank equal to the amount of water that was just poured into it, and it flows through the funnel into the coffee pot, providing freshly brewed coffee or tea within three minutes. Turn the warmer on with the on/off switch located on the stainless steel panel on the front of the brewer. The water that was just poured into the tank is then heated to 200 degrees F and remains in the tank until another pot of coffee or tea is made.
Summary
The water that is poured into the internal hot water heater first is the water that is used to make hot coffee or tea. As fresh water is poured into the internal hot water tank, the Velocity Brew BX has to make room for it, so it releases hot water into the funnel, making freshly brewed coffee or tea within three minutes.
References:
Velocity Brew Bx. (n.d.). Bunn. Retrieved on July 17, 2011 from http://www.bunnathome.com/products/velocity-brew/velocity-brew-bx